Answer Questions

• progfg Can't get Statement completion to work

  I've been trying for the life of me to get statement completion to work. So far I can get the method tip to show up showing the parameters for the method. It will bold the first parameter in the method. But I can't get it to bold the 2nd, 3rd etc. as you go along. My "Methods" implmentation is returning "(" for OpenBracket, ")" for CloseBracket, and "," for Delimiter. I thought I had done this previously when playing around with VSIP for 2003, but can't seem to get it to work in 2005. Do I need to be doing something with the "ref int state" that is being passed into the "ScanTokenAndProvideInfoAboutIt()" method Here is my code from the IScanner interface that I have impl ...Show All

• mkb137b UNC path of a local folder on Server??

  I have installed VSS 2005 on a WinXP Pro box (Server). I created a database at C:\VSS. I open SSAdmin, Server > Configure > Enable SourceSafe Internet for this database. It says, open the DB in UNC path. The folder is shared as "VSS". It is not accepting the "VSS" string in the create new database wizard.  It says, its not a valid UNC path. What do I need to give the UNC of a folder which is in the local file system of Server and shared as "VSS"   I tried "<computername>\VSS".. its not working because the server is looking for the computer on the network while its the name of the server itself. Sorry if I am dumb, but I couldn't find any documentation on this. TiA. I am trying to access this VSS folder from ...Show All

• RamyaP System.Runtime.InteropServices.COMException (0x80041004): Not enough memory for operation.

  Hi there, I have CS2003 and Crystal Reports XI R2 standard edition installed on my machine. Before CR XI installed, my application and reports worked fine. For some reason, I installed Crystal Reports XI R2 standard edition. I am not able to edit the report through VS, I have to change the existing reports through CR XI, luckly, my application still can load those reports if only with a little change. However, I wanna change all referenced CR assemblies in my project from 9.1.5000.0 to 11.5.3300.0 so that I do not have to worry loading problem with some new reports . But it did not work to me, the error message is: System.Runtime.InteropServices.COMException (0x80041004): Not enough memory for operation Can anyone tell me how to m ...Show All

• Duane Douglas Invalid Dos Path error when trying to run Analyze

  Hello all, I'm getting an Invalid Dos Path errror when trying to run Analyze on a SourceSafe database located on a server drive. The one clue is the acutal error (see below): Visual SourceSafe Analyze Version 8.0 Copyright (C) Microsoft Corporation. All rights reserved. Invalid DOS path: \\mcweb\sourcefiles\sourcesafe\\\mcweb\sourcefiles\sourcesafe" Obviously the path is bad as it appears to be "doubled-up" as you can see. I just can't find out why this is going on. I've checked the obvious solutions like the srcsafe.ini file and the paths are fine here (i.e. no double-entries just \\mcweb\sourcefiles\sourcesafe for the source path). So where is this path being created and or read I'm running analyze from a workstation, ...Show All

• Mahyar154572 Tearing in WPF

  I am seeing a lot of tearing in an animated WFP project. It also occurs in Expression Interactive Designer June CTP version. Running 3.0 June CTP on XP. Often the tearing seems to get "locked in" resulting in garbage on the screen. This can be redrawn by minimising and restoring the Window. Should I be concerned or is this being worked on Thanks, John I have similar issues, and I have filed in a bug about it. You can vote for it or add comments here: https://connect.microsoft.com/feedback/ViewFeedback.aspx FeedbackID=180703&SiteID=212 I personally haven't done a lot with animation in WPF but have read about a similar issue to what you're encount ...Show All

• h1 Error 403 when browsing to Service.svc file

  I am trying to run one of the wcf samples. I am deploying the server to IIS 6 and keep getting Http Error 403 Forbidden when I try to browse to the service.svc file. The directory and files appear to have the right permissions set. I added a Default.aspx page to the same directory and it works fine. I changed to Basic authentication and the Service.svc file returns the 403 error before I am even prompted to login. The Default.aspx page prompts me to login and then displays correctly. I had the sample working fine on my Windows XP workstation it just won't run on Windows Server 2003. Does anyone know what else I can check to get this working Thanks, Matthew This error still exists after you ru ...Show All

• BortNE24 Properties set on project do not influence import conditions

  Hello! Properties set on project (programmatically) do not influence import conditions. I execute a project from within code: Engine.GlobalEngine.BinPath = RuntimeEnvironment.GetRuntimeDirectory(); Engine.GlobalEngine.OnlyLogCriticalEvents = false; Project proj = new Project(Engine.GlobalEngine); proj.Load(e.Value); AddSavedStateAsProperties(proj); // <-- this props using AddPropertyGroup, etc proj.Build(targetName); If the project has imports with conditions - and those conditions test properties that are loaded in the AddSavedStateAsProperties method - the imports conditions fail. I have tried moving the load to after the AddSavedStateAsProperties call but that doesnt help. Any clues as to why th ...Show All

• lucerias Custom bindings with msmqTransport

  I am not able to get a simple send/receive sample to work with this binding: <customBinding> <binding name="msmqSoap11"> <textMessageEncoding messageVersion="Soap11"/> <msmqTransport exactlyOnce ="false" durable="true"> <msmqTransportSecurity msmqAuthenticationMode ="None" msmqProtectionLevel ="None"/> </msmqTransport> </binding> </customBinding> Are custom bindings allowed with MSMQ The messages are sent to the queue, but the service consumes them without routing the message to the service operation. I posted a similar question a few days ago with no response, but this is the readers digest version of the problem. I also ...Show All

• lwsimpson Cancel a long process Async call

  Hello all, I have a method taggued in the contract as "IsOneWay=true". This method have a long process. I m currently develop an windows application. I want to may user can cancel his request. So i do this : ChannelFactory<IWSSignIn> iSignInFactory = null; IWSSignIn signInProxy = null; iSignInFactory = new ChannelFactory<IWSSignIn>("WSSignIn"); isignInProxy = iSignInFactory.CreateChannel(); iSignInFactory.GetData(); // IsOneWay method with a long process I think that i must use abort method as this : iSignInFactory.Abort(); This work but the channel goes to close state. There is another possiblity Thanks for your help Nicolas Close r ...Show All

• Slugger25 SVCUtil.exe

  Hi All, I am working in WCF. Here my questio is, is it neccessary that to have Winfx SDK installed on the machine to use the SVCUtil.exe Next question, is there any advantage of using SVCUtil.exe instead of Add service reference Regards, Santha The SDK consists of tools and samples. You can choose not to install the samples, but the tools like svcutil are not included in the runtime bits. Where does svcutil exist on your machine and do you know how you got it on there >> Winfx SDK installed on the machine to use the SVCUtil.exe Yes. SanthaMind wrote: Next question, is there any advantage of using SVCUtil.exe instead of Add service reference ...Show All

• drew_p Overlapping elements over a FlowDocument

  Hi, I have a FlowDocument with sections, paragraphs, lines, etc. My target is (for example) to draw two lines in order to create a cross over the page (from angle to angle) so that the lines overlaps the entire page content. Another example is to overlap a big text like "Confidential" over (or behind) the content page. I tired using floaters but they need to be inside an inline, so they take space and modify the flow of the page. I want to overlap those elements without changing the normal flow instead. Thanks, Raffaele In particular, I would look at what it would take to instantiate a highlight annotation in XAML; give it a brush that basically contains your watermark; and attach it to a document, paragraph or ...Show All

• Chris DeHart Security Token Service Issues

  Hi, I'm trying to utilize the STS sample that was provided by Martin Gudgin. I have gotten the client to successfully request a security token based, and I can see the request coming into the STS and the token being issued. However, once the token is issued, and the service is contacted, I get the following error in the server diagnostics logs: The SecurityKeyIdentifier that was found in the SamlSubject cannot be resolved to a SecurityToken. The SecurityTokenResolver must contain a SecurityToken that the SecurityKeyIdentifier resolves to. I have both the client and server utilizing the wsFederationHttpBinding elements, and both are contacting the STS via identically configured wsHttpBindings. I've included the configuration entri ...Show All

• vasdeep VSTO 2005 SE Deployment Problem

  Hi, I am creating a Excel 2007 VSTO COM Add-In using VSTO 2005 SE . It runs perfectly fine when I build it and run the in development computer having VS 2005 . However, when I try to install the setup.exe or .msi file for the same addin in the client machine or Virtual PC having the following configuration: 1. VSTO Runtime 2. Office 2007 3. .NET 2.0 Framework it does not seems to load . I also did caspol settings to make it Fully Trusted . I get the following error " Not Loaded. A runtime error occurred during the loading of the COM Add-in ." Can someone please help me on this Thanks in advance Here we go ! Please download excelAddin6.zip from the following location . It contains the sour ...Show All

• Lawrex Problem hosting WCF on IIS

  I m hosting WCF on IIS. When I concatnate my service.svc file with the service.cs file, it works perfectly, below is the concatenated service.svc file: <%@ServiceHost language=c# Debug="true" Service="Microsoft.ServiceModel.Samples.CalculatorService" %> using System; using System.IO; using System.Collections; using System.Collections.Generic; using System.Diagnostics; using System.ServiceModel; using System.Text; using System.Timers; using System.Xml.Serialization; using System.Web.Services; namespace Microsoft.ServiceModel.Samples { // Define a service contract. [ServiceContract(Namespace = "http://Microsoft.ServiceModel.Samples")] public interface ICalculator { [OperationC ...Show All

• ron nash Visual Studio .NET 2005 slows down while loading and building on Intel Core 2 Duo

  Hi, I've got a new Dell Inspiron 9400 system running with intel core 2 duo and a clean installation of Visual Studio 2005, and everything seems to be okay except when i try to load a visual studio solution, and start debugging it. When it starts building the solution (by pressing F5), the build process runs fine, but it is when the embedded web server starts that the whole ide freezes for about 2 or 3 mins. The same happens when I close the navigator (IE6) and visual studio autommatically tries to stop debugging. It just freezes a long time, and I also tried downloading Service Pack 1 for Visual Studio 2005 but the same behavior after this. My complete system specifications are the following: Intel Core 2 Duo T7200 (@2 GHz) 1GB ...Show All